A-Safe

Car Park Barrier

The barrier of choice designed and tested specifically to provide the required levels of edge protection and vehicle restraint and containment at the perimeters of single level or multi-storey car parks and comprises of a 200mm single rail with an overall height of 560mm. Its impact height is 440mm. Post centres are 1600mm. A simple adaption of the standard product also makes it suitable to meet the requirements of barriers for use on Ramp Edge, Long Access Lane End and Split Level Deck Edge Protection applications also found in multi-storey car parks. For this particular product there is a choice of either A-Safe’s standard yellow and black or grey, to reflect the more traditional grey steel ‘armco’; all are compliant with current car park regulations. In a car park even a low speed impact with a perimeter structure, or worse a pedestrian, can lead to expensive damage repair or serious injury.

For raised single level car parks and on the upper or split levels in multi-storey car parks, a vehicle driven off an edge or a pedestrian falling off an edge can have even more severe consequences.

Applications and Benefits

Very specifically used for all car park situations and solutions, helping to avoid serious damage to vehicles occurring after accidental parking incidents. Gives edge protection in multi-storey car parks, as well as being adaptable in its flexibility for use in guiding and protecting access ramps, segregation lanes and split edges. In conjunction with other A-Safe products, like bollards, A-Safe can provide a total solution for car park safety.

• 

  Customer Referral

  “Principle decision to change the specification and buy A-Safe barriers was cost driven, however, the low maintenance and easy repair was also high on positive list.”
  Stewart Bishop, Sir Robert McAlpine, MSCP Cardiff

• 

  Technical Did You Know

  General Car Park Advice Checklist

  • Carry out a visual inspection of your site and make a note of where there are car parking problems.
  • Pay for a professional inspection or survey if you feel you cannot do this properly yourself.
  • Check for areas where the markings are worn or where there aren’t any markings.
  • Speak to your staff and ask what car parking problems they encounter and what problems they encounter with parked cars
• 

  Health & Safety Did You Know

  • Tested to BS 6399-1 (1996) and BS 6180 (1999).
  • Impact test force of 152kN; the equivalent of a 1.5 tonne vehicle travelling at 10 miles per hour at a 90° impact.
  • Impact height of 460mm
  • Ideal for mixed vehicles in a car park
  • Available in two colours
• 

  Product Sheet

  View or download a comprehensive product information sheet.

  Car Park Barriers Product Sheet